Milwaukee accessories hole dozer hole saw 54 mm - 49560127

Special featuresTooth material - Matrix II premium high speed steel is used for the teeth of the hole saw. Matrix II steel contains 8% cobalt so that the teeth retain their original hardness. Even at high temperatures that occur in, for example, metal cutting applications. -Bi-metal construction – Quality steel teeth are laser welded to a high-alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600°C to give them maximum durability and lifespan. - Thanks to the high wear resistance of the Matrix II steel, the hole saws are ideal for cutting difficult and hard materials such as stainless steel, but also for softer materials such as wood. Hole saw body - The 1.27 mm thick steel body of the hole saw is stiff enough to retain its shape, but of course also has sufficient built-in elasticity. Right-handed cutting angle for maximum productivity. Tooth design - A tooth design with 3.5 teeth per inch and a positive tooth angle of 10° offers the following benefits: - Faster and more aggressive cut. - Improved heat dissipation during sawing ensures that the teeth remain sharp for longer. - Deeper curved chip spaces ensure more efficient chip removal, preventing clogging and heat development. - The specially shaped tooth angle has less tendency to snag on thinner materials. - Teeth are set alternately/sideways to minimize binding and friction. - Requires less feed pressure - This is achieved through the combination of aggressive tooth geometry and good chip evacuation, requiring less force during drilling. Hole saw base plate - The hole saw base plate is made of thick steel. This ensures shape retention even after intensive use. - Perfectly produced round base plates, important for large diameter hole saws. Diagonal slots help remove the drilled material. Applications - Manufacturing techniques carried out to the highest quality standards ensure high concentricity. These hole saws are therefore suitable for both hand and pillar drills (manual feed only). This high-quality series of hole saws is the perfect solution for cutting all types of materials: - Steel up to 1000 N/mm² strength - Stainless steel and acid-resistant steel - Non-ferrous metals - Cast iron - Aluminum - Wood - Medium density fibreboard (MDF) - Plasterboard - Sandwich materials - PVC.