Soudal Sou Gun Foam Low | Gun Foam | 750 l - 106132

Finely dosable PU gun foam for perfectly controllable professional application. The foam has limited post-expansion, resulting in less foam waste. Classic screw-thread gun system.Special featuresHigh dimensional stability (no shrinkage or post-expansion)High filling capacity, but expands less aggressivelyHigh insulation value, thermal and acousticExcellent mounting propertiesVery precisely dosable, allowing for faster finishing.ApplicationMounting and sealing door and window framesFilling joints, wall penetrations and cavitiesInsulating panels, corrugated sheets, roof tiles, etc.Instructions for useShake the can well for at least 30 seconds. Screw the can on tightly. Adjust the adjusting screw and spray out foam by pulling the trigger. Only partially fill cavities: the foam will expand. Shake regularly during use. If working in several layers, moisten between layers. Remove spilled, uncured foam with Soudal GUNCLEANER. Cured foam can only be removed mechanically or with Soudal PU-remover. The can, with the gun attached, can be stored for later use without risk of curing. If no new can is placed on the gun, thoroughly clean the gun with Soudal GUNCLEANER. Lightly moistening the substrate accelerates curing and provides an even better cell structure. Processing temperature: +5°C to +30°C. Preferably store upright.